|
|
Power200 - 10/100 Mbps Fast Ethernet Adapter
MPN 18-1E-R200 |
|
The CNet Power200 is a 10/100Mbps dual speed Tast Ethernet adapter. This card is equipped with an auto-negotiation functionthat authomatically supports data transnission bandwidthsranging from 10Mbps-200Mbps. this function smoothly and automatically switches drivers between 10/100Mbps, full or Half-Duplex LAN connections. The adapter runs in 32-bit bus master mode and comes with drivers for the most major operating systems.
Key Features
- Single-chip PCI Bus 100BASE-TX Fast Ethernet.
- Fully compiles with IEEE 802.3u and IEEE 802.3 standards .
- Full-Duplex available in both modes for up to 200Mbps throughput.
- Optimal line-speed set automatically via Auto-Negotiation function.
- Shielded RJ-45 connector provides unified 100BASE-TX and 10BASE-T network media interface.
- Complies with PCI specification 2.1, 2.2.
- Comply with ACPI 1.0 and PCI Bus Power Management 1.1.
|
| Model |
Power200 |
| Drivers |
Netware 3.x, 4.x, 5.x
Windows 95/98 ,Windows NT, Windows 2000, XP
Netware DOS Client (DOS ODI)
Linux (kernel 2.2, 2.4), FreeBSD, SCO5, Solaris, Unixware 7
Wfwg311
NDIS Packet driver |
Standards |
IEEE 802.3u 100BASE-TX
IEEE 802.. 10-BASE-T |
| BUS Type |
PCI Bus specification revision 2.1, 2.2. |
| Network Interface |
One (1) shielded RJ-45 phone-type jack |
| Network Modes Supported |
100BASE-TX (Category 5 TP cable required)
10BASE-T (Category 3, 4, and 5 TP supported)
Full-Duplex available in both modes |
| LED's |
100M (Green), ACT/LINK (Green) |
| Environment |
Operating Temp.: 32° ~ 131° F (0° ~ 55° C)
Storage Temp.: -4° ~ 158° F (-20° ~ +70° C)
Humidity: 10% ~ 90% non-condensing |
| Dimensions |
4.71 x 1.65 inches (120 x 42 mm) |
ORDERING INFORMATION
| CNet Model# |
Description |
| Power200 |
10/100 Mbps Fast Ethernet PCI-Bus Adapter |
|
|
